Metal Frame
The metal frames "Rhombus" are suitable for hanging your bobbin lace tip.
Size: approx. 13 x 9.5 cm
The metal frames are real gold-plated and therefore tarnish-resistant.
For mounting your handicraft, we recommend a perlon thread (magic thread). Suitable bobbin lace patterns can be found in the accessories.
The metal frames "Ellipse" are suitable for hanging your bobbin lace tip.
Size: approx. 11 x 4.5 cm
The metal frames are real gold-plated and therefore tarnish-resistant.
For mounting your handicraft, we recommend a perlon thread (magic thread). Suitable bobbin lace patterns can be found in the accessories.
LED star light - warm white LEDs - black metal frame, approximately 20cm.
A cozy decoration with your crochet tip.
The LED light heart is powered by 2 batteries (AA/1.5V). These are not included in the delivery.
Battery box with switch for on/off and timer. Delivery while supplies last.
LED luminous stars - 2 stars - 50 warm white LEDs - 2 suction cups - timer
Size: approx. 25 + 17 cm.
The perfect decoration for the Christmas season with your bobbin lace. For windows, mirrors, glass doors.
With timer: Once activated, the LEDs light up for 6 hours and then switch off for 18 hours.
The LED light stars are operated with 3 batteries (AA/1.5V). These are not included.
The Metal Frames "Archway" are suitable for hanging your boobin-lace.
Size: 6: about 16,5 x 22,5 cm (6,5 x 8,9 in), gold-plated, rarnish-proof.
To the montage of your handicraft, we recommend a nylon-thread (magic thread). These and suitable pattern you will find in the equipment.
Real gold-plated, tarnish-proof.
The dimensions are approximate:
Largest outside width 29.5 cm
Largest width inside: 29cm
Smallest width inside: 14.5 cm
Available in gold and silver colors
5 pieces, diameter 10cm
The Metal Rings are suitable for hanging your bobbin lace.
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
The Metal Frames "Star 5-pointed" are genuine gold-plated and tarnish resistant. The frames are suitable for hanging your bobbin-lace.
Diameter: ca. 21 cm (8,3 in)
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
(The delivery does not include the shown lace.)
The Metal Frames "Drop, big" are genuine gold-plated and tarnish restistand. The frames are suitable for hanging your bobbin-lace.
Size: ca. 10 x 16,5 cm (3,9 x 6,5 in)
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
The Metal Frames of "Mobile Star" are genuine gold-plated and tarnish resistant. The frames are suitable for hanging your bobbin-lace. This 9-pieces set consists of 7 metal frames "Star" (1 pieces per size) and 2 metal arcs. The set is without pattern.
The following metal frames "Star" are included:
- Size 1: ca. 5,5 cm (2,2 in)
- Size 2: ca. 7,5 cm (3,0 in)
- Size 3: ca. 9,5 cm (3,7 in)
- Size 4: ca. 12 cm (4,7 in)
- Size 5: ca. 14,5 cm (5,7 in)
- Size 6: ca. 17 cm (6,7 in)
- Size 7: ca. 20 cm (7,9 in)
The following metal arcs are included:
- Span 1: ca. 13,5 cm (5,3 in)
- Span 2: ca. 20 cm (7,9 in)
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
(The delivery does not include the shown lace.)
The Metal Frames of "Mobile Star" are genuine gold-plated and tarnish resistant. The frames are suitable for hanging your bobbin-lace. This 12-pieces set consists of 7 metal frames "Star" (1 piece per size), 2 metal arc and the suitable pattern for the star frames.
The following metal frames "Star" are included:
- Size 1: ca. 5,5 cm (2,2 in)
- Size 2: ca. 7,5 cm (3,0 in)
- Size 3: ca. 9,5 cm (3,7 in)
- Size 4: ca. 12 cm (4,7 in)
- Size 5: ca. 14,5 cm (5,7 in)
- Size 6: ca. 17 cm (6,7 in)
- Size 7: ca. 20 cm (7,9 in)
The following metal archs are included:
- Span 1: ca. 13,5 cm (5,3 in)
- Span 2: ca. 20 cm (7,9 in)
The following patterns are included:
- 3 Stars size 1, 2 and 3 (Art.-Nr. 88E127)
- 3 Stars size 4, 5 and 6 (Art.-Nr. 88E128)
- Star size 7 (Art.-Nr. 88E99)
To the montage of your handicraft we recommend a nylon-thread (magic-thread). You will find it in the equipment.
(The delivery does not include the shown lace.)
The Christmas Tree Topper "Star" are genuine gold-plated and tarnish resistant. The frames are suitable for hanging your bobbin-lace.
The frames are available in the following sizes:
- small: 14,5 cm (5,7 in), Größe 5
- big: 20,0 cm (7,9 in), Size 7
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
(The delivery does not include the shown lace.)
The Metal Arch are genuine gold-plated and tarnish resistant. The set consists of two archs, for example for mobile.
Span 1: ca. 13,5 cm (5,3 in)
Span 2: ca. 20 cm (7,9 in)
To the montage of your handicraft we recommend a nylon-thread (magic-thread). You will find it in the equipment.
Diameter: ca. 5 cm (2 in)
Available in the following varations:
- genuine gold-plated
- silver-colored
The Metal Frames "Bell" are genuine gold-plated and tarnish resistant. The frames are suitable for hanging your bobbin lace.
The frames are available in the following sizes:
- Size 1: 8,5 x 8,5 cm
- Size 2: 11 x 11,5 cm
- Size 3: 13 x 14 cm
- Size 4: 15,5 x 16 cm
- Size 5: 18,5 x 19 cm
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
The Metal Frames "Drop, small" are suitable for hanging your bobbin-lace, for example from the book "Kleine Schmuckstuecke in Chrysanthe-Technik" (see in equipment).
Size: ca. 5 x 10 cm (2 x 3,9 in)
The frames are available in the following sizes:
- genuine gold-plated (tarnish resistant)
- silver-plated
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
The Metal Frames "Egg, small" are suitable for hanging your bobbin-lace, for example from the book "Kleine Schmuckstuecke in Chrysanthe-Technik" (see in equipment).
Size: ca. 6 x 8 cm (2,4 x 3,1 in)
The frames are available in the following variations:
- genuine gold-plated (tarnish resistant)
- silver-plated
- gold ribbed
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
The Metal Frames "Heart" are genuine gold-plated and tarnish resistant. The frames are suitable for hanging your bobbin-lace.
The frames are available in the following sizes:
- Size 1: 8,5 x 9 cm (3,3 x 3,5 in)
- Size 2: 11,5 x 12 cm (4,5 x 4,7 in)
- Size 3: 15,5 x 16 cm (6,1 x 6,3 in)
- Size 4: 19 x 20,5 cm (7,5 x 8,1 in)
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
The white covered metal rings are suitable for hanging your bobbin lace.
Available in the following sizes:
- Diameter: 10 cm (3,9 in)
- Diameter: 12 cm (4,7 in)
- Diameter: 15 cm (5,9 in)
- Diameter: 18 cm (7,1 in)
- Diameter: 20 cm (7,9 in)
- Diameter: 22 cm (8,7 in)
- Diameter: 25 cm (9,8 in)
We recommend a nylon thread (magic thread) to mount your handicraft. These and suitable pattern you will find in the equipment.
The Metal Frames "Moon" are genuine gold-plated and tarnish resitant. The frames are suitable for hanging your bobbin-lace.
The frames are available in the following sizes:
- small: 6 x 7,5 cm (2,4 x 3 in)
- big: 18 x 15 cm (7,1 x 5,9 in)
To the montage of your handicraft we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
The Metal Rings are genuine gold-plated and tarnish resistant. The rings are suitable for hanging your bobbin lace.
Available in the following Sizes:
- Diameter: 10 cm (3,9 in)
- Diameter: 12 cm (4,7 in)
- Diameter: 15 cm (5,9 in)
- Diameter: 19 cm (7,5 in)
- Diameter: 20 cm (7,9 in)
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
Gives your Christmas stars the right framework. The Metal Frames "Star" are genuine gold-plated and tarnish resistant. The frames are suitable for hanging your bobbin-lace.
The frames are available in the following sizes:
- Size 1: 5,5 cm (2,2 in)
- Size 2: 7,5 cm (3 in)
- Size 3: 9,5 cm (3,7 in)
- Size 4: 12,0 cm (4,7 in)
- Size 5: 14,5 cm (5,9 in)
- Size 6: 17,0 cm (6,7 in)
- Size 7: 20,0 cm (7,9 in)
The frames are also available as a 7-pieces set:
- Set (1x each size)
To the montage of your handicraft, we recommend a nylon-thread (magic-thread). These and suitable pattern you will find in the equipment.
The Christmas Tree Topper "Star 5-pointed" are genuine gold-plated and tarnish resistant.
Diameter: ca. 21 cm (8,3 in)
To the montage of your handicraft, we recommend a nylon-thread (mafic-thread). These and suitable pattern you will find in the equipment.
(The delivery does not include the shown lace.)